At the VE7AVV location there is no
access to the Internet. Using DX TNC, VE7AVV connects to the
VE7CC DX Cluster. With the RF connection established,
I want to output the incoming spots from Station 3 to Stations 1 and 2
via a null modem serial cable (as shown below) using TR Log network.
During a contest, this setup (if it's possible) will allow
Station 3 to scroll up and down through the available spots. In
addition, the operators at Stations 1 and 2 will receive the spots
in the cluster window of TR Log.
If this setup is technically possible using DX TNC to establish the DX Cluster connection and in turn output the spots via DX Telnet (in Accept 1 mode) to TR Log, how do I set all this up? Please explain the process. To date I have been able to establish the connection to the VE7CC DX Cluster on Station 3 and to get Station 1 and 2 networked via TR Log. That's as far as I have been able to go. What's next? |
Last modified
February 08, 2004
by Paul B. Peters,
Show contact information
Copyright © 2000 -2003 Paul B. Peters, VE7AVV. All rights reserved.